
| Cable Specification | |
| Annealed solid copper wire Diameter 0.40 mm (AWG 26) | Conductor |
| Polyethylene compound Nominal thickness: 0.15 mm | Insulation |
| Pairs with lay length ≤ 45 mm | Cabling element |
| Group Identification tape : A-white, B-Blue, C-Yellow, D-Brown Wire color for each group: 1-White, 2-Black, 3-Red, 4-Brown, 5-Blue, 6-Grey, 7-Yellow, 8-Green |
Colour code |
| 4 groups of 8 pairs | Stranding of pairs |
| white, blue, yellow, brown | Group identification tape |
| One or more synthetic tapes | Wrapping tape |
| Tinned copper wire of 0.5 mm | Drain wire |
| ALU/PET/ALU tape with a total aluminium thickness ≥ 24 μm The tape is applied longitudinally or with a slow-turn spiral |
Screen (electrostatic) |
| Rip cord | Rip cord |
| PVC (Grey RAL7001) Nominal thickness 1.0 mm |
Outer sheath |
| Nominal 11 mm; maximum 12.4 mm | Outer cable diameter |
| 150 kg/km | Net cable weigth |
| 110 mm | Minimum bending radius |
| 0 ÷ 50 ° C installations -20 ÷ 70 ° C working |
Temperature range |
| Max. ≤ 150 Ohm / Km | D.C. electrical resistance of each conductor (at 20°C) |
| 1000 V a.c. or 1500 V d.c. | Voltage test for 1 minute (at 20°C) |
| Min. ≥ 1000 Mohm*km | Insulation resistance (at 20°C) |
| 100±20 ohm @ 700 kHz | Impedance (at 20°C) |
| ≤ 27 dB/km @ 700 kHz | Attenuation (at 20°C) |
| ≥ 50 dB @ 700 kHz ≥ 35 dB @ 7 MHz |
Near-end and Far-end crosstalk (at 20°C) |
| Connector Specification | |
| 5A | Current rate |
| 1,000 Ohms (minimum) | Insulation resistance |
| 1,000V AC/minute | Dielectric voltage |
| -55 to +105 °C | Operating temperature |
| Huawei cable | Suitable for cable |
| Ni | Shell material |
| 64 | Pin number |