Voice of the Customer : +989125708854
1/2″ Jumper Cable, N-Type male/ N-Type male
Please do not hesitate to contact us if you require any further information
Foreign Commercial Manager : +989125708854
1/2″ Jumper Cable, N-Type male/ N-Type male is commonly used for the connection of the RF cable lines with the antenna or with the radios. Cable and connectors have been soldered together in the production operation. Security of the joint and their concentric is guaranteed by a tight plastic cover. this flexible jumper designed, manufactured and/or distributed under this quality management system (ISO9001 & ISO14001). Quality of the product is tested according to IEC and MIL Standards.
• High quality and excellent performances
• Low attenuation and VSWR
• Strong corrosion-resistant
• 1/2″ super flexible coaxial cable (length of cable depending on customer request )
• Compliant with MIL, IEC and RoHS
| Materials Specifications | |
| Cable | 1/2″ Super Flexible |
| Jumper Type |
Factory-Fit (Standard) |
| Length, m |
3m, Based on customer requirements |
| Impedance |
50 ± 1 Ω |
| Connector A | N male/Straight |
| Connector B | N male/Straight |
| Intermodulation, 3rd Order, dBc | ≤ -155 |
| Insulation Resistance MΩ |
≥ 100000 |
| DC Breakdown Voltage (4kV,A.C.,1min) | No Breakdown or Flashover |
| VSWR |
≤1.06 @ 800-1000 MHz ≤1.08 @ 1700-2200 MHz ≤1.08 @ 2200-2400 MHz ≤1.10 @ 2400-2700 MHz |
| Attenuation dB | ≤0.42 @ 800 MHz ≤0.45 @ 900 MHz ≤0.66 @ 1800 MHz ≤0.70 @ 2000 MHz ≤0.73 @ 2300 MHz ≤0.76 @ 2500 MHz ≤0.85 @ 2700 MHz |
| Minimum Bending Radius, mm |
25 |
| Degree of protection |
IEC 60529, IP68 |
| High Temperature Test |
No Abnormality |
| Low Temperature Test |
No Abnormality |
