Voice of the Customer : +989125708854
FCCC RX Jumper
Please do not hesitate to contact us if you require any further information
Foreign Commercial Manager : +989125708854
RX jumper made from rg223 coaxial cable and RF SMC connectors. The RX jumper is used for wireless telecommunications applications, including WiFi, PCS, radio, computer networks, test instruments, Distribution Antenna Systems (DAS) and antenna devices. Cable and connectors have been soldered together in the production operation. Security of the joint and their concentric is guaranteed by a tight plastic cover. Quality of the product is tested according to IEC and MIL Standards.
• High quality and excellent performances
• High reliability and safety
• Fast and easy installation
• Low attenuation and low loss and low VSWR
• Excellent electrical conductivity
• High operating voltage
• Operating frequency to 3 GHz
• Available in variety of lengths
• Resistant to flames, sparks & Flame propagation
• Flexible
• Resistant to aging
• High dimensional stability
• Compliance with military and international standards (IEC, etc)
| General specifications | ||
| Cable | RG-223 | |
| Connector | SMA-Male-Right Angle | |
| Impedance | 50 ohms | |
| Frequency Range | DC~3GHz | |
|
Cable specificationh |
||
|
Construction |
||
| Material | Diameter, mm | |
| Inner Conductor | Silver-coated copper | 0.89±0.01 |
| Insulation | PE | 3.0±0.10 |
| Outer Conductor | Tinned copper = 1st shield
Tinned copper = 2st shield |
4.18 (Nom.) |
| Jacket | PVC | 5.4±0.15 |
| Mechanical specification | ||
| Operating temperature range | -20ºC to +80 ºC | |
| Single Bending Radius, mm | 25 | |
| Electrical specification | ||
| Characteristic impedance | 50±2 Ω | |
| Capacitance | 101 pF per m | |
| Inductance (µH) | 0.077 | |
| Nominal propagation velocity | 66 % | |
| Voltage Rating, Vrms | 1900 | |
| Max.Operating Frequence, GHz | 12.4 | |
| Attenuation and rating power | ||
| FrequencyMHz | Typical Attenuation
@20ºC,dB/100m |
|
| 100 | 13.3 | |
| 200 | 20.4 | |
| 400 | 27.4 | |
| 500 | 32.0 | |
| 1000 | 45.5 | |
| 3000 | 84.9 | |
| 5000 | 109.9 | |
| 10000 | 177.5 | |
| Connector specification | ||
| Gender | Female | |
| Termination Method | Crimp, Solder | |
| Body Orientation | Right Angle | |
| Impedance | 50Ω | |
| Operating Frequency Range | DC-3GHz | |
| Contact Material | Material | Brass/phosphor bronze |
| Plating | Au | |
| VSWR | ≤1.20 | |
